
INSTALLATION AND OPERATING MANUAL OIL BURNING STOVE ALASKA 2000 Vérified and tested following CAN/CSA B140.3 et UL 896 standards by: Intertek
LIGHTING (CONT’D) • Place the flow regulating handle on the "1" position, as soon as the oil enters the burner return to "0"
TURNING THE STOVE OFF • Set the flow regulating handle to position 0. • If you plan to keep the stove off for a long while, it is recommended to
TROUBLESHOOTING GUIDE PROBLEMS CAUSES SOLUTION ON POSITION 6 (MAXIMUM) THE FLAME IS LONG AND SMOKY, THERE IS SUIT BUILD UPON THE GLASS Positi
TROUBLESHOOTING GUIDE PROBLEMS CAUSES SOLUTION THE FLAME PRODUCES SMOKE, IN ANY POSITION Door gasket is not selling properly 1. Tighten door by
SPARE PARTS After years of use, if you need to replace some parts, please contact your SUPPLIER or one of our Drolet approved DEALERS. • Give hi
Page 14 of 15
W A R R A N T Y The Drolet Stoves & Fireplaces warranty applies to the original buyer only. This warranty may not be transferred to a second
TABLE OF CONTENT TECHNICAL DATA...
INSTALLATION INSTRUCTIONS LOCATING THE STOVE • Install the stove as close to the chimney as possible. • Many configuration are possible, the m
CHIMNEY INFORMATIONS • Before the hook up of the stove, check if the chimney is in good condition and that the quality of the flue will allow a su
CONNECTING THE STOVE TO THE CHIMNEY • The gases are vented from he back of the unit. The female part of the black pipe connector has to be inst
LEVELING THE UNIT • Now that the stove is in place and properly hooked up to the chimney, you have to adjust the level on the burner. • Put the
CONNECTING STOVE TO OIL TANK • Make sure that the tank outlet is 12" higher than the inlet of the carburetor. (Gravity fed) • Use only cape
ADJUSTING THE DRAUGHT • Your stove operated with natural draught, created by the ascension of combustion gases in the chimney. This movement cre
OPERATION INSTRUCTIONS COMBUSTIBLE • Your stove has been design to work with oil #1 or #2. DO NOT USE GASOLINE, CRANKCASE OIL OR ANY OIL CONTAI
Commentaires sur ces manuels