Drolet SIT 0.820.634 Nova Manuel d'utilisateur

EXCEL-FIRE VENTED GAS STOVE INSTRUCTIONS MANUAL WARNING: If the information in these instructions is not followed exactly, a fire or explosion

EXCEL-FIRE GAS STOVE 9 Gas connection • Move the EXCEL-FIRE to the desired position and secure in place with four screws.• Connect gas line to the

EXCEL-FIRE GAS STOVE 10 1. Open the pedestal front panel to reach the control. 2. Make sure the gas control knob is turned to the ‘’OFF’’ position

EXCEL-FIRE GAS STOVE 11 If Your Glass Breaks: • See your dealer for exact replacement glass. • Remove front as explained above. With a 5/16” nut dr

EXCEL-FIRE GAS STOVE 12 Installation • Put the burner assembly back in the fire box and push to the right. • Make sure the main orifice is inserted

EXCEL-FIRE GAS STOVE 13 Pilot assembly Adjusting air shutter (Venturi) The factory setting for the air shutter is 1/4” for natural gas, fuily open f

EXCEL-FIRE GAS STOVE 14 1700, rue Léon-Harmel, Québec (Québec) G1N 4R9 tel. : (418) 527-3060 fax : (418) 527-4311 e-mail : [email protected] web

EXCEL-FIRE GAS STOVE 1 TABLE OF CONTENTS GENERAL INFORMATION...

EXCEL-FIRE GAS STOVE 2 GENERAL INFORMATION The EXCEL-FIRE gas stove is a high-efficiency free-standing gas appliance with a maximum input rating of

EXCEL-FIRE GAS STOVE 3 TECHNICAL SPECIFICATIONS Dimensions • Height : 29 ¾ in. 756 mm • Width : 24 in. 610 mm • Depth : 20 in. 508 m

EXCEL-FIRE GAS STOVE 4 Burner Naturel Gas Propane LP Maximum Input, BTU/h (kW) minimum : maximum : 20 000 (5,9) 30 000 (8,8) 20 000 (5,

EXCEL-FIRE GAS STOVE 5 INSTALLATION Safety notice • Improper installation may result in a house fire. Follow installation directions. Installation

EXCEL-FIRE GAS STOVE 6 For clearance between pipe and flammable materials, follow vent pipe manufacturer’s instructions. Logs installation

EXCEL-FIRE GAS STOVE 7 1. Remove the two door retaining screws at the bottom right and left of the door. 2. Remove the door. 3. Locate the log gr

EXCEL-FIRE GAS STOVE 8 DISTANCE DIAMETRE 20 pi 18GA 30 pi 16GA 40 pi 14 GA 50pi 12GA REMOVE THE BLUE JUMPER BETWEEN TP & TPTH SCREWS